Authors: Sunil S. Nayak, Abhay Taranath Kamath
Categories: Case Report
Source: Journal of International Society of Preventive & Community Dentistry
A series of surgical cases operated in our unit are considered to analyze and evaluate the different techniques and sequencing employed in the surgical management of double/triple mandibular fractures involving a condylar fracture. Deviating from the normal sequence of reducing and fixing the dentate segment first, we addressed the condylar segment first. A combination of different approaches for different cases such as a periangular with a vestibular, a preauricular and a retromandibular with a vestibular were used according to the type of fractures. The accessibility to one difficult case with a medially displaced condyle was facilitated by using Hegar's uterine dilators. In all cases, good anatomical reduction was achieved with stable occlusion and without any signs of facial nerve impairment. The 'Condyle first' approach in the surgical management of double/triple mandibular fractures, is a reliable and efficient technique.
KEYWORDS: Condylar fractures, double mandibular fractures, Hegar's dilators
The management of condylar fractures has been a hugely controversial topic in oral and maxillofacial surgery. There has been a large difference of opinion regarding open or closed treatment of condylar fractures among oral and maxillofacial surgeons. Sequencing of surgical management of double or triple mandibular fractures involving a fractured condyle is another debatable topic of interest to surgeons. Traditionally, while one school of thought favors addressing of the dentate segment first, only a very few advocate the “ condyle first” approach.
The surgical management of double/triple mandibular fractures involving a condylar component as dealt with in our unit has been depicted in a series of cases.
This case series involves four patients operated in our surgical unit. Informed consent was obtained from each of these patients.
A 28-year-old patient reported following a road traffic accident (RTA) with a complaint of pain in the lower jaw and difficulty in biting. After the preliminary care and management, routine blood and biochemistry investigations were carried out, values of which were well within normal limits. Radiographic and computed tomography revealed a right-side subcondylar fracture with an associated left parasymphyseal fracture [Figure 1] and a right zygomaticomaxillay complex (ZMC) fracture.
Figure 1 Orthopantomogram
The patient was taken under general anesthesia and was intubated nasally. After adequate preparation, we approached the condylar fracture through a periangular approach, and this was followed by an intraoral vestibular approach to reduce and fix the parasymphyseal fracture [Figures 2–4]. Finally, we addressed the ZMC fracture.
Figure 2 Fixation of the subcondylar fracture by the periangular approach
Figure 4 Postoperative orthopantomogram
Figure 3 Fixation of the parasymphyseal fracture
A 21-year-old male patient presented with a bilateral condylar and a symphysis fracture. In this case, a combined approach was employed to reduce and fix the fractured condyle. The right medially displaced condylar fracture was addressed. A preauricular approach was advocated to retrieve the medially displaced fractured condyle [Figure 5]. To facilitate proper reduction and fixation of the fractured segments, a retromandibular approach was also used. We used Hegar's uterine dilators in sequence to create an accessible working space for reduction and fixation, passing it through the retromandibular incision, and exiting through the preauricular incision [Figure 6]. During plating, the superior screws were placed through the preauricular incision and the inferior screws were placed through the retromandibular incision. Finally, the symphysis fracture was reduced and fixed through an intraoral vestibular incision. Postoperative radiograph was taken to assess the surgical outcome [Figure 7].
Figure 5 Preauricular approach
Figure 6 Use of Hegar's uterine dilator
Figure 7 Postoperative orthopantomogram (Case 2)
A 35-year-old male, carpenter by profession, reported to us following a RTA. He was diagnosed with a panfacial fracture which included a LeFort 3, ZMC, naso-orbital-ethmoid, bilateral condylar, and symphysis fractures [Figures 8 and 9]. The right subcondylar-ramus fracture was approached through a periangular incision. The left dislocated condyle was then reduced and fixed through a preauricular approach. This was followed by the symphysis fracture reduction and fixation through an intraoral vestibular approach. The midface was finally reduced and fixed. This was followed by a postoperative orthopantomogram for assessment [Figure 10].
Figure 8 Three-dimensional computed tomography scan showing bilateral condylar fractures
Figure 9 Three-dimensional computed tomography scan showing symphysis fracture
Figure 10 Postoperative orthopantomogram showing two-plate fixation of the fractured condyles
A 22-year-old student reported following a RTA and was diagnosed with a panfacial fracture which included bilateral subcondylar, symphysis, bilateral ZMC, and a LeFort 2 fracture. We decided to restore the vertical ramus height first and addressed the left subcondylar fracture through a retromandibular approach [Figure 11]. The next step was to reduce and fix the mandibular symphysis fracture. Having established a stable base, the midface was addressed next and a stable occlusion was achieved.
Figure 11 Retromandibular approach
Open reduction and internal fixation was employed for the surgical management, and Zimmer Biomet Titanium implants were used for fixation in all cases. A variety of different condylar approaches were employed for the above cases. In all cases, we reduced and fixed the condylar fractures first.
In the first case, while we used a periangular incision, in the second case, we had used a combination of preauricular and retromandibular approaches to reduce and fix a fractured condylar segment which was difficult to retrieve from its displaced site. The lack in laxity of the soft tissues due to its bulkiness and fibrosis led us to the use of Hegar's uterine dilators in a sequencing manner of their sizes, to gain space and create an accessible working area. In the third case, we addressed both condylar fractures, but by different approaches, the periangular approach for the right subcondylar fracture and the preauricular approach for the left dislocated condylar fracture. In the fourth case, we used a retromandibular transmasseteric anteroparotid approach to address the condyle on the left side while the right condyle was left untouched.
Different surgical approaches were employed but the condylar fracture was addressed first in each of the above cases. Even though some of the cases had associated midface fractures, the mandible was approached first. All the patients had double or triple mandibular fractures with one of the components being a condylar fracture.
All cases showed good postoperative results. The postoperative occlusion was found to be stable in all patients. No signs of neurological deficit were present. The postoperative functional activity of the patients improved drastically compared to the preoperative status. The second patient who had a bilateral condylar fracture exhibited minor deviation of the chin toward the left while opening the mouth. This could be attributed to the fact that only the right condylar segment was reduced and fixed. The minor discrepancy was corrected using guiding elastics postoperatively.
RTA accounted for about 49.5% of mandibular fractures and the mean age of the patients affected was 28 years.[1,2] The incidence of double/triple mandibular fractures among all mandibular fractures ranges between 22% and 52%.[3]
Some authors are of the opinion that reduction and fixation of the condyle before the symphysis in double mandibular fractures is difficult due to the potential chances of the condylar fragment being malpositioned.[4]
Orabona et al. conducted a study in this regard and had come to a conclusion that tooth bearing fractured fragments should be reduced before nontooth-bearing fractured fragments, but they were also of the opinion that fracture reduction and fixation was much easier to perform when the nontooth-bearing component was addressed first.[5]
The absence of craniomandibular articulation results in lack of posterior support to the mandibular ramus segment making it malpositioned.[6] When fracture at the anterior region such as the symphysis is fixed first following maxillomandibular fixation, the mandible can flare laterally at the gonial angle and at the inferior border.[6] In all our patients, we reduced and fixed the condylar segment first and restored the craniomandibular articulation.
Reconstruction of fractures involving the symphysis, condyle, and midface is best started from the condyle.[7] The proper mandibular width as well as the sagittal mandibular position can be adequately restored when reduction and fixation of the condyle is done first.[7,8] The same sequence was followed in fracture management of our patients.
Open reduction and internal fixation of the condylar fracture first helps in restoration of the midface projection, particularly in panfacial fractures. The reconstruction of the condylar segment first helps in restoring the posterior facial height. This would benefit in treating associated mandibular and midface fractures.[9]
Symphysis reduction after fixation of the condyle could adversely affect the condylar internal fixation when a single plate is used to fix the fractured condyle.[10] Single-plate fixation of the fractured condyle may result in internal fixation failure. Hence, two straight plates or three-dimensional plates are highly recommended.[11] Two miniplates, applied in a triangular fashion, one at the posterior border of the ramus and one below the sigmoid notch, are ideal in fixation of subcondylar fractures.[12] In our unit, the condylar segment was fixed by two plates, along the same principles.
The distribution of compressive stress on the posterior border of the ramus and tensile stress inferior and parallel to the sigmoid notch of the mandible were demonstrated by the photoelastic analysis put forth by Meyer et al.[13] In our patients, two plates were fixed, one along the posterior border of the ramus and the other below the sigmoid notch [Figures 4, 7, and 10] to counter these areas of stress.
The retromandibular transparotid approach is a reliable technique for the surgical management of condylar fractures.[14] Rarely, some complications such as sialocele can result from this approach.[15] We preferred the retromandibular transmasseteric anteroparotid approach which is considered to be a friendly approach to surgeons of varying grades.[16] A combined approach to the fractured mandibular condyle [Figure 6] such as the preauricular and submandibular is employed sometimes to aid in reduction and fixation of difficult fractures of the condyle.[17] This also helps in applying traction to the mandible inferiorly.[18]
The fractured condylar area can be associated with functional disability subsequent to surgery.[19] None of our patients presented with any complications postoperatively which give credibility to our surgical techniques.
Open reduction and internal fixation of the fractured condylar fragment before the tooth-bearing fractured fragment is a reliable and efficient technique. Reconstruction of the fractured condylar fragment first helps establish the posterior facial height which acts as a scaffold to treat other associated fractures.
The authors certify that they have obtained all appropriate patient consent forms. In the form, the patients have given their consent for images and other clinical information to be reported in the journal. The patients understand that name and initials will not be published and due efforts will be made to conceal identity, but anonymity cannot be guaranteed.
Nil.
There are no conflicts of interest.